leveling mode meaning in Chinese
平层模式
Examples
- Control will revert to down - level mode and post back to the server each time a user clicks the node
控件将恢复到低级（ down - level ）模式并在每次用户单击节点时回发到服务器。 - Based on the discussions above and aimed at the shortcoming of not considering the effect of high level modes enough , this paper proposes an improved modal pushover analysis method
在此基础上，针对高阶振型影响不能充分考虑的不足，提出了改进的振型pushover分析方法。 - Multichip module ( mcm ) is high - level mode in electronic package . mcm is that bare dice and microelements are assembled on a high - density interconnection ( hdi ) substrate . mcm can meet the demands of compact packaging and high density
多芯片组件( mcm )是微电子封装的高级形式，它是把裸芯片与微型元件组装在同一个高密度布线基板上，组成能够完成一定的功能的模块甚至子系统。 - The converter not only keeps all the characteristics of the basic zvs pwm h - fb tl converter , but also eliminates the voltage oscillation and voltage spike across the rectifier diodes in both three - level mode and two - level mode , leading to a reduced voltage stress of the rectifier diodes
本文在基本zvspwmh - fbtl变换器中引入两只箝位二极管,无论是在三电平模式还是在两电平模式,都可以消除输出整流二极管反向恢复造成的电压尖峰和振荡,降低了输出整流管的电压应力。 - But this method still exists some shortcomings such as : while adopting displacement - control analysis method how to estimate the structural displacement requirement , how to select the horizontal load mode before and after the structure yields , how to considerate the high level mode that have a large effect while it is in the later position , how to considerate the elastic - plastic response spectra correctly . these problems remain to be solved . so this method needs to improved furtherly
但该方法仍存在一些不足，如：分析时采用位移控制的方法时，如何预估结构的最大位移需求；结构屈服前后水平荷载的分布模式如何选取；对结构影响显著但比较靠后的高阶振型如何考虑；如何正确的考虑结构的弹塑性反应谱等问题仍没有得到很好的解决，因此该方法仍需进一步的改进。